How to Remove Paint from Concrete | Ep. 176
Katherine Jones, in Cherokee Village, Ark., desires to know the best way to remove paint from the concrete on her 60-foot-extensive front porch.
She does not want to use a severe chemical stripper that could eliminate the shrubs and grass all over the porch.
The freshly painted concrete seems to be great and quick to clear, but not long just after it starts off to blister or bubble. This is why we really don’t advocate painting concrete.
Here’s how to remove paint from concrete.
For a porch this dimension, hire an orbital floor sander and opt for a sandpaper that is not too coarse. You want to eliminate the finish and not grind the concrete. This will be the least complicated way to get the bulk of the paint off.
Then, you are going to have to use some elbow grease to sand the spots the sander just can’t arrive at, like all over handrails and columns.
There are citrus-dependent strippers that are non-toxic and aren’t unsafe to plants. This kind of stripper will assist in the parts the place the sander can’t arrive at.
Also, take into account leasing a soda blaster. It operates the same as a sandblaster but employs baking soda as an alternative.
Skip to [23:12] for the total phase on the Today’s Property owner Podcast.
Also on this episode:
Very best New Product
|Get the same energy as gas minus all the sound with Ryobi’s Whisper Wander electric powered push mower. Understand more>>|
Improvised Garden Sprinkler — The future time you will need to drinking water newly planted grass seed, trees, bouquets or shrubs, and you really don’t have a sprinkler, you have a several alternatives.
You can go out and obtain 1, borrow one from a neighbor, or you can make a single from an empty soda jug.
- Drill 3 or 4 1/8-inch-diameter holes in the side of a plastic, two-liter soda bottle.
- Wrap some Teflon tape all over the bottle treads and then screw on a woman-to-feminine hose connector.
- Connect a yard hose to the hose connector, spot the sprinkler in the lawn with the holes experiencing up, and turn on the h2o.
Check out: How to Make a Sprinkler for Your Garden or Back garden
Rescuing Applied Rubber Gloves — In advance of discarding utilized latex gloves, snip off any fingers that aren’t way too poorly damaged or filthy, and use them as slip-on fingertip protectors when spreading glue, smoothing caulk or spraying paint.
Problem of the Week
Q: My spouse and I are developing a new dwelling. I was arranging to use spray foam insulation, but immediately after calling numerous termite-bonding companies, I was stunned that most ended up hesitant to address homes with spray foam. Some flatly refused protection. Why is that, and what other alternatives do I have?
A: Some termite-bonding organizations really do not go over residences with spray foam insulation for the reason that of inspection concerns.
If you have fiberglass or Rockwool insulation, an inspector can just pull the insulation absent to glance for termite harm. With spray foam insulation, they cannot do that for the reason that it sticks to the wood.
Some southern states have modified their making codes to need a termite inspection strip. This strip is mounted above and below the basis slab and enables inspectors to see termite problems in houses with spray foam insulation.
Speak to a neighborhood setting up inspector and see what they endorse to do on a new house make.
Skip to [31:59] for the whole segment on the Today’s Property owner Podcast.
Even more Reading through
Inquire a Concern! (Podcast)
Talk to a concern and we could answer it on the “Today’s House owner Podcast!” We also could use it on our nationally syndicated radio broadcast or on todayshomeowner.com.